Dialogic 4000 SERIES Manual de usuario descargar pdf (Pagina 96)

Dialogic

4000 Media Gateway Series Reference Guide

Page 96

Use Case for Microsoft

Exchange Server 2007

This configuration scenario describes the necessary steps for configuring the gateway computer between the

PBX and the Microsoft

Exchange Server 2007, as shown below.

For this configuration scenario, the PSTN interface, the network interface, one SIP peer, and one route need to

be configured.

1. Open the Diva SIPcontrol web interface to configure the required parameters. To do so, click Start >

Programs > Dialogic Diva > SIPcontrol Configuration.

2. In the Diva SIPcontrol web interface, click Board Configuration on the left hand side to open the Available

Diva Boards section.

3. Click either the board icon or the name of the Diva Media Board to access the board configuration options.

4. Configure the D-Channel Protocol of the PBX. In this example, PBX. QSIG E1-(QSIG) is selected:

5. Click Save.

6. Repeat Steps 2 through 5 for the other PRI line.

7. In the Diva SIPcontrol web interface, click SIPcontrol configuration on the left hand side to open the

SIPcontrol Configuration page.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 167 168

Sin comentarios

Dialogic 4000 SERIES Manual de usuario Pagina 96