Dialogic 4000 SERIES Manual de usuario Pagina 122

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 121
Dialogic
®
4000 Media Gateway Series Reference Guide
Page 122
The fifth address map is necessary to map the number of unassigned internal numbers to the reception
number. In the following example, the reception has the extension 2000. The address map is later used
in a route for unassigned internal numbers. All numbers using this route will end up at the reception. To
create the this address map, click Add again, and configure the following parameters:
Address map name: Enter an address map name for calls to the reception.
Rule name: Enter a name that describes the address map rule. This name will be displayed on the
main configuration page.
Under Called address rules, configure the following parameters:
Address Condition: Enter ^.*$. Because this address map will be associated with a route for internal
unassigned numbers, this expression will match all of those numbers.
Address Result: Enter the number of the reception, to which the unassigned internal numbers will
be routed. Include the country code, area code, base number, and extension, as shown in the graphic
above.
10. Under PSTN Interfaces, configure Controller 1 with PSTN-specific settings and Controller 2 with PBX-specific
settings. The controller number that you configure with the PBX-specific settings needs to correspond to the
line number in the Diva Configuration Manager on which you configured the switch type of your PBX. Similarly,
the controller number that you configure with the PSTN-specific settings needs to correspond to the line
number in the Diva Configuration Manager on which you configured the switch type of your PSTN line.
Vista de pagina 121
1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 167 168

Comentarios a estos manuales

Sin comentarios