Dialogic 4000 SERIES Manual de usuario descargar pdf (Pagina 26)

Dialogic

4000 Media Gateway Series Reference Guide

Page 26

You can now access the Diva SIPcontrol web interface on any of the IP addresses of the computer where SIPcontrol

is installed, and then you can configure the settings according to your needs.

Dialogic

Diva

SIPcontrol™ Configuration Sections

Diva SIPcontrol configuration is divided into the following sections:

• P

STN Interfaces, as described on page 30

• Network Interfaces

, as described on page 34

• SIP Peers, as described on page 35

• Routing, as described on page 41

• Security Profiles

, as described on page 44

• LDAP, as described on page 47

• D

ialplans, as described on page 51

• Address Maps

on page 53

• Cause Code Maps, as described on page 57

• Codec Profiles, as described on page 58

• R

egistrations, as described on page 59

• Logging and Diagnostics, as described on page 60

Configuration Tips and Hints

This section contains useful information about SIPcontrol configuration:

• Changes to the configuration will only take effect after you click Activate Configuration at the bottom of

each configuration page.

• The settings will be lost if you close the Diva SIPcontrol web interface without having saved the configuration

at the bottom of each configuration page.

• A restart of Diva SIPcontrol is recommended if you change the IP address or the port on which SIPcontrol is

listening. If you do not restart, Diva SIPcontrol will continue listening on the previously configured port and

IP address.

Note: The restart will terminate active connections.

• The names for specific configuration elements are limited to 32 alphanumeric characters and must not be

repeated, i.e., you cannot assign the same name for two SIP peers.

• The configuration session times out after 30 minutes of inactivity and a new login is required to access the

session again. If the new login screen appears when you try to save the configuration, login again and click

the "Back" button of the browser. The configuration session opens with the settings before the time out and

you can save the configuration.

• To restart the Dialogic

Diva

WebConfig service, in the SIPcontrol web interface, click System control on

the left hand side, and then click Restart in the System status management section.

• Diva SIPcontrol provides a secure configuration via the web interface (HTTPS). The default port for HTTPS is

10006. Diva SIPcontrol provides a default certificate, but for security reasons you can install your own

webserver certificates. To install a webserver certificate and corresponding key file, upload and install these

files in the Webserver certificate management section under System Control.

• To use TLS for SIP calls, you need to upload the certificates as described under Security Profiles

on page 44

and enable the TLS port as described under Network Interfaces

on page 34.

• To open the online help for a specific parameter, click the parameter, and a window with the help text will

appear.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 167 168

Comentarios a estos manuales

Sin comentarios

Dialogic 4000 SERIES Manual de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Dialogic 4000 SERIES