Dialogic 4000 SERIES Manual de usuario descargar pdf (Pagina 121)

Use Case Examples

Page 121

Under Called Address rules, configure the following parameters:

• Address Condition in the Calling address rules section: Enter ^[0-9].

. This expression matches

all calls from the PSTN.

• Address Result in the Calling address rules section: Enter the 0 (zero), so that it is added in the

output, followed by the $&, which adds the incoming number after the 0.

Click OK to save the settings and close the window.

• The fourth address map is also only necessary if the PBX is configured as if it is still connected to the

PSTN. To create this address map, click Add again, and configure the following parameters:

• Address map name: Enter an address map name for calls from the gateway to the PBX.

• Rule name: Enter a name that describes the address map rule. This name will be displayed on the

main configuration page.

• Address Condition in the Calling address rules section: Enter ^0. With this expression, the OAD

will be removed from calls to the PBX.

Click OK to save the settings and close the window.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 167 168

Sin comentarios

Dialogic 4000 SERIES Manual de usuario Pagina 121