Dialogic 4000 SERIES Manual de usuario descargar pdf (Pagina 104)

Dialogic

4000 Media Gateway Series Reference Guide

Page 104

Using the Gateway Computer Between the PBX/PSTN and Microsoft

Office Communications Server

2007

This configuration scenario describes the necessary steps if one line of the gateway computer is connected to

the PBX and one line is connected directly to the PSTN, as shown in the following graphic.

For this configuration scenario, two dialplans, the two PSTN interfaces, the network interface, one SIP peer, one

address map, and three routes need to be configured.

1. Open the Diva web interface to configure the required parameters. To do so, click Start > Programs >

Dialogic Diva > SIPcontrol Configuration.

2. In the Diva web interface, click Board configuration on the left hand side to open the Available Diva

Boards page.

3. Click either the board icon or the name of the first Diva Media Board to access the board configuration options.

4. Configure the D-Channel Protocol of port 1. In the example, PBX. QSIG E1 - (Q.SIG) is selected.

5. Click Save.

6. Click Board configuration again, and select port 2 of your Diva Media Board to access the board

configuration options.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 167 168

Sin comentarios

Dialogic 4000 SERIES Manual de usuario Pagina 104