Dialogic 4000 Series SU4.1 Manual de usuario Pagina 97
- Pagina / 226
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
How Calls Are Processed
89
Direct Routing between One PSTN Interface and One SIP Peer
If you choose to route all calls from the PSTN to the same SIP peer, and calls from that SIP
peer to the PSTN, configure the parameters as follows. For this configuration, no address
rewriting is done:
1. Under PSTN Interfaces, enable and configure all PSTN interfaces connected to a
PBX. Confirm each dialog box with OK.
2. Under SIP Peers, create a SIP peer with the necessary settings, and make sure that
the option Default peer for received SIP calls is enabled. Confirm with OK.
3. Under Routing, create Route 1 and do the following:
Select each required PSTN interface as a source peer.
Select the SIP peer configured in Step 2 as a Master destination.
Set the Number format field to Unchanged.
Confirm with OK.
4. Under Routing, create Route 2 and do the following:
Enable the SIP peer configured in Step 2 as a source peer.
Enable all required PSTN interfaces as Master destinations.
Set the Number format field to Unchanged.
Confirm with OK.
5. Save the configuration in the main configuration interface.
Direct Routing between Two SIP Peers
If you choose to route all calls from the PSTN to the same SIP peer, and calls from that SIP
peer to the PSTN, configure the parameters as follows. For this configuration, no address
rewriting is done:
1. Under SIP Peers, create one SIP peer with the necessary settings, and make sure
that the option Default peer for received SIP calls is enabled. Confirm with OK.
2. Under SIP Peers, create the other SIP peer with the necessary settings. Confirm with
OK.
3. Under Routing, create Route 1 and do the following:
Select the SIP Peer configured in Step 1 as a source peer.
Select the SIP peer configured in Step 2 as a Master destination.
Set the Number format field to Unchanged.
Confirm with OK.
4. Under Routing, create Route 2 and do the following:
Select the SIP peer configured in Step 2 as a source peer.
Select the SIP peer configured in Step 1 as a Master destination.
Set the Number format field to Unchanged.
Confirm with OK.
5. Save the configuration in the main configuration interface.
- Dialogic 1
- Copyright and Legal Notice 3
- Table of Contents 5
- 1. Introduction 9
- General Features 11
- Call Handling Features 12
- Media Processing Features 13
- Supported RFCs 13
- Enhanced Routing 14
- DSP-Based Features 16
- Fax and Modem Features 16
- Q.SIG Features 17
- PBX Interoperability 18
- Preparing for Configuration 19
- License Activation 19
- Device Unique ID (DUID) 20
- Proof of Purchase Code (PPC) 20
- To Activate a License File 22
- The Board Monitor 25
- The View Report Option 26
- Public Line ISDN Protocols 30
- Carrier Grade 31
- PBX Protocols 31
- Specific Major PBX Types 31
- Configuration Tips and Hints 34
- PSTN Interfaces 39
- Enhanced 40
- Address Normalization 42
- Network Interfaces 45
- SIP Peers 46
- Security 51
- Session Timer 52
- Authentication 54
- Routing 55
- Dialplan) 56
- Conditions 57
- Address Manipulation 60
- Security Profiles 61
- Global Security Parameters 62
- Diva SIPcontrol 64
- Use Case for LDAP 64
- LDAP Query 65
- LDAP Domain 66
- LDAP Cache 68
- Dialplans 69
- Address Maps 72
- Cause Code Maps 76
- Codec Profiles 78
- Registrations 80
- Logging and Diagnostics 82
- 6. Data Security 83
- Secure RTP 84
- SIPcontrol 85
- 7. How Calls are Processed 93
- Emergency Calls 96
- Routing Conditions 96
- Routing Examples 96
- Common Expressions: 103
- Common Results 103
- Address Map Examples 104
- 9. Software Uninstallation 107
- 10. Cause Code Mapping 109
- 11. Event Logging 121
- Warnings 122
- Informational Messages 123
- 12. Use Case Examples 125
- Microsoft® Lync™ Server 2010 175
- 13. SNMP Support 199
- SNMP Support 201
- Configuration Manager 203
- Diva® Line Test Tool 211
- Performing a Line Check Test 211
- Performing a Hardware Test 213
- Performing a Phone/Loop Test 213
- Advanced setup 214
- Advanced transfer setup 215
- Performing a Fax Test 216
- Diagnostics Tool 219
- 17. Customer Service 225
- Dialogic Customer Support 226
Relacionado con productos y manuales para Gateways / Controladores Dialogic 4000 Series SU4.1
(316 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.070 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales