Dialogic 4000 Series SU4.1 Manual de usuario descargar pdf (Pagina 19)

3. Initial Configuration and License Activation

Preparing for Configuration

The initial configuration allows the unit to be configured using a remote desktop connection.

The DMG4000 Gateway is initially configured with:

 Ethernet port 1: with fixed IP address 192.168.1.1

 Ethernet port 2: with fixed IP address 192.168.2.1 on the older DMG4000 model;

enabled with DHCP on the newer DMG4000 model

 Ethernet port 3 and 4: enabled with DHCP, only available on older DMG4000 models

Note: The above numbering of the Ethernet ports refers to the numbering at the rear

panel of the DMG4000 Gateway and not to the numbering displayed in the Control Panel

of your operating system.

 User name: Administrator

 Password: Dialogic (Change the password after the initial log on.)

Before you start to configure your DMG4000 Gateway, it is necessary to gather some

information about the environment in which it will be used.

Collect the following information:

1. In case the gateway is to be connected to a PBX: Which vendor and which PBX type

will be used?

2. What protocol will be used on the PSTN/PBX side of the gateway? Examples are

EuroISDN (ETSI-DSS1), Q-SIG, and DMS100.

License Activation

Diva SIPcontrol includes a license for two channels that can be used for testing and

evaluating Diva SIPcontrol.

You must activate a license if you need more than the two channels with Diva SIPcontrol, or

if you want to use G.729 speech compression or fax offered with the installed Diva Media

Board. During the activation process of the license, you need to choose a Diva Media Board

to which the license should be bound. After having activated the license for this Diva board,

the license cannot be transferred to be used with another Diva board.

Notes:

 Diva SIPcontrol licenses need to be activated via the Diva SIPcontrol web interface,

as described under To Activate a License File.

 Licenses for G.729 and fax can be uploaded and activated via the Diva SIPcontrol

web interface and Diva Configuration Manager. See the Dialogic

Diva

Configuration

Manager Online Help for more information.

 Fax is needed to enable T.38 FoIP support in Diva SIPcontrol. It needs to be licensed

only for Dialogic

Diva

PRI Media Boards with multiple ports.

 The Dialogic

Host Media Processing (HMP) Software licenses for SIP channels are

also valid for SIPcontrol, but they require the Dialogic HMP software to be installed

on the same system as Diva SIPcontrol.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 225 226

Comentarios a estos manuales

Sin comentarios

Dialogic 4000 Series SU4.1 Manual de usuario Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Dialogic 4000 Series SU4.1