Dialogic 4000 Series SU4.1 Manual de usuario descargar pdf (Pagina 60)

Dialogic 4000 Media Gateway Series SU4.1 Reference Guide

Name

Redirect

If the route is supposed to be valid only for specific redirect numbers, enter a

name for the redirect numbers to which the route should apply.

The following additional parameters appear when Extended Condition is enabled and you click

the more >>> button:

Number type

The calling, called, and/or redirect numbers to which the route should apply

must match one of the enabled number type conditions.

For example, if National and Network specific are enabled in the Calling

column, then the calling number in the route must be either a national or

network-specific number type.

Numbering

plan

The calling, called, and/or redirect numbers to which the route should apply

must match one of the enabled numbering plan conditions. For example, if

ISDN/telephony E.164 and National standard are enabled in the Called column,

then the called number in the route must use either an ISDN/telephony E.164

or national standard numbering plan.

Presentation

The calling and/or redirect numbers to which the route should apply must

match the enabled presentation conditions.

Screening

indicator

The calling and/or redirect numbers to which the route should apply must

match the enabled screening indicator conditions.

Note: If expressions should match from the beginning, prepend the caret symbol ("^") at

the beginning of the expression, for example:

Number: 1234567

Expression: ^123

Format: 4567

Result: 45674567

The address modified by an address map in a routing condition is usually formatted as it

was on arrival. If the address originated from a SIP peer, there will be a host/domain name

attached to the address.

Address Manipulation

You can configure the following parameter in the Address Manipulation section when you

create or modify a route:

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 225 226

Sin comentarios

Dialogic 4000 Series SU4.1 Manual de usuario Pagina 60