Dialogic Brooktrout TR1034 BRI Guía de usuario descargar pdf (Pagina 74)

FAX BOARDS AND FAX DRIVERS INSTALLATION

Configuration Parameters

for T1 ISDN Ports

Asynchronous Balanced Mode Extended (SABME) messages. Set the parameter as

follows:

FALSE = Indicates that the port does not send SABME messages

TRUE = Indicates that the port does send layer 2 SABME messages

Default value: TRUE

screening

Specifies a value that indicates whether the port provides and validates the calling

party number passed to the called party. Valid values are:

NETWORK_PROVIDED Indicates that the network validates the calling party

number.

USER_NOT_SCREENED Indicates that the port provides the calling party

number without validating it.

USER_VERIFICATION_FAILED Indicates that the port failed to validate the

calling party number.

USER_VERIFICATION_PASSED Indicates that the port provides the calling

party number and passes a successfully validated number to the called party.

Note: You should set the parameter to USER_NOT_SCREENED when connected to a

public network.

Default value: USER_NOT_SCREENED

switch_type

Specifies a value indicating the type of switch used for the board connection. Valid

values are:

ATT_4ESS AT&T #4 ESS

ATT_5ESS AT&T #5 ESS

NTI_DMS100 Nortel DMS-100

NTI_DMS250 Nortel DMS-250

MD110_T1 Selects Ericsson MD-110 switch for North America

MD110_E1 Selects Ericsson MD-110 switch (International)

SIEMENS Siemens

NTT Japan

UNKNOWN Selects a switch type that complies with the ITU-T standards

Default value: UNKNOWN (ITU-T compliant)

transfer_variant

Specifies the transfer method that the network (refer to the vendor specifications for

your switch) runs for call transfers or disables call transfer. Valid values are:

NONE = Disables call transfer

TBCT = Specifies an ETSI transfer with explicit linkage

RLT = Specifies a Release Link Trunk transfer

NTT = Specifies a JATE active redirecting transfer

Default value: TBCT

wait_for_bchannel_status

Specifies a Boolean value that determines when the system puts the B-channels in

service. Set the parameter as follows:

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 94 95

Comentarios a estos manuales

Sin comentarios

Dialogic Brooktrout TR1034 BRI Guía de usuario Pagina 74

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Dialogic Brooktrout TR1034 BRI