Dialogic Brooktrout TR1034 BRI Guía de usuario Pagina 65

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 95
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 64
BROOKTROUT CONFIGURATION FILES
65
Configuration Parameters
for BRI Ports
connect request before advancing an incoming call to the connected state.
Default value: FALSE
Configuration
Parameters for E1 ISDN
Ports
call_type
Specifies the call type to use when making the outbound call. Use one of the following
values for this field:
AUTO = Makes a call using the modem type and then automatically retries the call
using the voice type if the other end cannot accept modem calls.
MODEM = Makes a modem (3.1 kHz audio) call. This setting provides higher
quality audio for the call.
SPEECH = Makes a voice call.
Default value: AUTO
crc
Specifies a Boolean value that indicates whether the port has cyclical redundancy
checking (CRC) enabled. Set the parameter as follows:
FALSE = Indicates that the port has disabled CRC
TRUE = Indicates that the port has CRC enabled
Default value: TRUE
default_caller_id
Specifies a string of up to 15 characters that provides the caller ID to use when placing
outbound calls. If the user application provides a caller ID when placing a call, the system
ignores this field.
Unit: character string
Range: 1 - 15 (_ECC_MAX_ANI_LENGTH)
Default value: Blank
did_offset
Specifies a value that defines the number of digits to remove from the beginning of the
string of DID digits received from the network. Valid values are:
0 = Does not remove any DID digits
1 - 63 = Specifies the number of digits to remove
Range: 0 through 63
Default value: 0
did_timeout
Specifies a value that defines the maximum timeout allowed before processing the call
after assuming receipt of the last DID digit. Valid values are:
0 = Indicates no waiting time
1 - 20 = Specifies the number of seconds to allow after receiving the last DID digit
before processing the call
Unit: second
Vista de pagina 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 94 95

Comentarios a estos manuales

Sin comentarios