Dialogic Brooktrout TR1034 BRI Guía de usuario descargar pdf (Pagina 69)

BROOKTROUT CONFIGURATION FILES

Configuration

Parameters for E1 ISDN

Ports

transfer_variant

Specifies the transfer method that the network (refer to the vendor specifications for your

switch) runs for call transfers or disables call transfer. Valid values are:

NONE = Disables call transfer

ETSI_EXP_LINK = Specifies an ETSI transfer with explicit linkage

NTT = Specifies a JATE active redirecting transfer

Default value: ETSI_EXP_LINK

wait_for_conn_ack

Specifies a Boolean value that determines whether the system waits for the network to

acknowledge a connect request before notifying the application that a call has been

answered. Set the parameter as follows:

FALSE = Specifies that the system does not wait for the network to acknowledge a

connect request before advancing an incoming call to the connected state.

TRUE = Requests the system to wait for the network to acknowledge a connect

request before advancing an incoming call to the connected state.

Default value: FALSE

Configuration

Parameters for E1 R2

CAS Ports

crc

Specifies a Boolean value that indicates whether the port has cyclical redundancy

checking (CRC) enabled.

DISABLED= Indicates that the port has disabled CRC

ENABLED = Indicates that the port has CRC enabled

Default value: ENABLED

default_caller_id

Specifies a string of up to 15 characters that provides the caller ID to use when placing

outbound calls. If the user application provides a caller ID when placing a call, the

system ignores this field.

Unit: character string

Range: 1 - 15 (_ECC_MAX_ANI_LENGTH)

Default value: Blank

line_coding

Specifies a value defining the type of line encoding to use for the port. Valid values are:

AMI = Selects Alternate Mark Inversion (AMI)

HDB3 = Selects High Density Bipolar Order 3 (HDB3)

Default value: HDB3

line_impedance

Specifies a value that defines the line impedance the port uses. Valid values are:

75 = Specifies that the port uses an impedance value of 75 ohms

120 = Specifies that the port uses an impedance value of 120 ohms

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 94 95

Comentarios a estos manuales

Sin comentarios

Dialogic Brooktrout TR1034 BRI Guía de usuario Pagina 69

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Dialogic Brooktrout TR1034 BRI