
RightFax 8.5 Fax Board Guide 29
4. In the Assign Firmware File dialog box, select a firmware file that corresponds to the type of
phone lines you will connect to the fax board. Select one of the options from the following table.
5. Click OK. A list of installed Dialogic devices opens.
6. Expand the list of devices and under TDM Bus double-click Bus-0.
7. In the TDM Bus Configuration dialog box, select Media Type (User Defined) in the list of
parameters, and in the Value box select MuLaw.
8. Scroll down the list of parameters, select NETREF One FRU (User Defined), and type “GDK_T1 0”
or “GDK_E1 0” (depending on your board type) in the Value box.
9. Click OK to return to the list of installed Dialogic devices, and then close the Dialogic
Configuration Manager window. This returns you to the GammaLink/Dialogic Configuration
dialog box. Leave this dialog box open for the next set of steps.
Configure the RightFax BoardServer module
1. In the GammaLink/Dialogic Configuration dialog box, select BoardServer CPL.
2. In the Board Configuration dialog box, select Detect GammaLink Board.
3. When the Board Detection dialog box reports that GammaLink fax boards have been successfully
detected, click OK.
4. Configure the remaining options on the Board Configuration dialog box for all fax boards and
individual fax channels according to the instructions in the RightFax Administrator’s Guide.
5. When you have completed the options in the Board Configuration dialog box, click OK. This
returns you to the GammaLink/Dialogic Configuration dialog box. Leave this dialog box open for
the next set of steps.
Table 4B CPi/2400CT-T1 and CPi3000CT-E1 Firmware Files
Firmware file Phone line type
gdk_t1_em.pcd Robbed-bit T1 using E&M start
gdk_t1_gs.pcd Robbed-bit T1 using ground start
gdk_t1_ls.pcd Robbed-bit T1 using loop start
gdk_isdn_4ess.pcd ISDN PRI using 4ESS protocol
gdk_isdn_5ess.pcd ISDN PRI using 5ESS protocol
gdk_isdn_dms.pcd ISDN PRI using DMS protocol
gdk_isdn_net5.pcd ISDN PRI using NET5 protocol
gdk_isdn_ntt.pcd ISDN PRI using NTT protocol
Comentarios a estos manuales