Dialogic 2000 Series Manual de usuario descargar pdf (Pagina 22)

Configuring the DMG2000 Series for Hybrid Operation Configuring the Dialogic Media Gateway

Configuring the Inbound TDM Rules for Hybrid Operation

For hybrid operation, two inbound TDM rules must exist, one for voicemail and one for all other call

traffic.

To configure the inbound TDM rules for voicemail and other call traffic, follow these steps:

1. Using the menu on the left, navigate to Configure > Routing Table.

2. Select the Inbound TDM Rules radio button.

3. Use the Add Rule button to create two inbound TDM rules, one for voicemail and the one for other call

traffic.

4. Configure the Rule Label, Request Type, and Trunk Group of each inbound TDM rule with the

values in the following table:

5. In the Inbound TDM Rules section, highlight the Voicemail Calls rule. The Detailed Configuration

for Inbound TDM Rule: Voicemail Calls section will appear.

Table 13. Inbound TDM Rules for Hybrid Operation

Enable Rule Label Request Type Trunk Group

Yes Voicemail Calls Any TdmAll (created in

Configuring the TDM Trunk

Group for Hybrid Operation on

page 19)

Yes InboundTdm Any TdmAll (created in

Configuring the TDM Trunk

Group for Hybrid Operation on

page 19)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 30 31

Sin comentarios

Dialogic 2000 Series Manual de usuario Pagina 22