
Innovation Voice Mail
PBX Installation and Testing Guide
07/05/2011
20
Enter a valid extension number and test turning the message lamp on and off. The following
information will be displayed on the “Monitor” portion of the InnLine’s main screen (example
below is of turning a message lamp on )
Since the communication between InnLine IP and the gateway is SIP, this is all that is displayed
on the InnLine IP monitor all activity screen. The gateway itself performs the button presses
(using the MIK key) to turn on the message lamp.
Testing the Hotel PMS / Nortel Meridian 1 PMSI interface
Click the Do button, and choose Interface: Nortel PMS (Meridian 1) to monitor the interface.
Click on Port to pull down a menu box, and choose to monitor the PMS side of the interface, if it
is not already chosen.
Have a test check in message sent from the PMS. The message should appear in RED on the
interface. The voicemail system will respond with an acknowledgment [ACK], which will appear in
GREEN. Toggle over to the PBX side of the interface. The check-in message will appear in
GREEN. The Nortel PMSI port will respond with an acknowledgment [ACK], which will appear in
RED.
Examples:
PMS side of the interface
Click here to view the
menu
.
Comentarios a estos manuales