Dialogic DMG1008DNI Manual de usuario descargar pdf (Pagina 19)

Innovation Voice Mail

PBX Installation and Testing Guide

07/05/2011

DEVICE INTERFACE CONNECTIONS:

Connecting the voicemail system to both the PMS and the Nortel Meridian

In this model, the Hotel’s PMS system does not have a direct serial connection to the Meridian 1.

Instead, the PMS connects to one of the voicemail systems COM ports. A second COM port on

the voicemail system connects to the Meridian 1’s PMSI TTY port. All PMS serial messages

(such as check-in / check-out / room move) are sent first to the voicemail. The voicemail system

then passes the message to the Meridian 1. Likewise, any serial messages generated by the

Meridian 1 (such as maid status) are sent to the voicemail. The voicemail system then passes

these messages to the Hotel PMS. The brand of PMS does not matter in this model, as long as

the PMS system has written an interface based on Nortel’s MHVS specification.

Installing the Nortel PMS device interface driver in the voicemail system

From the Do button menu, click Configure System, then on Device Interfaces of the system

tree. Double-click the New Interface icon and scroll down till you find the Nortel PMS (Meridian

1) interface. Click OK. Choose the Serial Ports tab, and adjust the communication parameters of

serial ports A and B, to match the PMS and the Nortel Meridian 1’s PMSI port, if necessary.

Serial port pin configuration

The serial connections on the multi port COM cable are DB25M DTE.

Pin 2 – Transmit Data

Pin 3 – Receive Data

Pin 7 – Signal Ground

No hardware strapping in required.

Hotel PMS

Meridian 1

PBX

Com4

Com5

PMSI

InnLine IP voicemail

server

1 2 ... 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Dialogic DMG1008DNI Manual de usuario Pagina 19