Dialogic DMG1000 Manual de usuario Pagina 6
- Pagina / 12
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Dialogic
®
1000 Media Gateway Series
Quick Start Guide for Avaya Modular Messaging Release 5.2
6
Step 4 - Final Gateway Configuration
Once the initial configuration is complete and the gateway has been restarted, you will need to log into the web
interface by browsing to the IP address of the gateway using “admin” as the user and entering the gateway
password (“IpodAdmin” is the default).
Verify that you have Version 6.0 or later software. Update the gateway with firmware posted on the following
FTP site: ftp://avaya:[email protected]om
.
Navigate to: System > Upgrade after downloading the .pkg firmware file -
1. Click Browse to locate the .pkg firmware file.
2. Click Install File. After file installation is complete, restart the gateway as prompted.
Setting TDM Parameters
Navigate to: Configuration > TDM > Digital and verify the following settings -
1. Ensure that the Telephony Switch Type is set to match the PBX connected to the gateway.
2. Click Submit to save settings. This will prevent loss of configuration. Do not restart the gateway.
Ensure that the
Telephony Switch
Type is set to match
the PBX
Relacionado con productos y manuales para Gateways / Controladores Dialogic DMG1000
(22 paginas)Sony SVP112190X podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Notatniki Sony SVP112190X.
Dostarczamy 1 pdf podręczników Sony SVP112190X do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales