Dialogic 2000 Series Manual de usuario descargar pdf (Pagina 6)

o If configuring each T1/E1 port on the gateway individually, please read on.

Otherwise, skip to the next step. If each port on the gateway requires different

interface side configurations, select the port to be configured from the Select

Port to Modify drop down menu (port 2 in the example below). The, set the

Telephony Port Interface Side for port 2 (Terminal or Network).

NOTE: This has to be opposite of the PSTN / PBX trunk configuration. So if the

PSTN / PBX trunk is terminal, then the gateway interface must be network.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Dialogic 2000 Series Manual de usuario Pagina 6